top of page

Free Shipping Over £150 Subject to T&C's

Untitled design (5)_1769099439.png_width=2400&optimize=medium.png

How to Choose the Right Bathroom Extractor Fan

2 days ago
3 min read

Updated: 21 hours ago

Right Bathroom Extractor Fan

Steamy mirrors are only the first warning, as trapped moisture can turn into damp walls and black mould. In 2024, 1.4 million homes in England (5%) had a damp problem. Severe condensation was the most common type, according to the English Housing Survey. An extractor fan fixes the issue by pushing steamy, damp air outside before it settles.


To choose the right bathroom extractor fan, check six things: fan type, airflow, noise level, IP rating, controls, and fit. Aim for at least 15 litres per second, and match the IP rating to your bathroom zone. This guide provides instructions on how to choose the right bathroom extractor fan, including tables and examples.


6 Things to Check Before You Buy a Bathroom Extractor Fan


To buy the right bathroom extractor fan, choose the correct type, then check the airflow and the noise level. Next, match the IP rating to your bathroom zones, pick the right controls, and confirm the fan fits your duct. The sections below explain each check in plain language.


1. Choose the Right Fan Type


The three main types are axial, centrifugal, and inline. Axial fans suit short runs through a wall, window, or ceiling. Centrifugal and inline fans suit longer ducts and quieter rooms. Most bathrooms use a 100 mm (4-inch) fan.


Fan type

Best for

Axial

Short runs through a wall, window or ceiling

Centrifugal

Longer ducts and bends

Inline

Quiet rooms and loft spaces, as the fan sits in the duct


2. Check the Airflow


Look for at least 15 litres per second (54 m³/h), the government's guidance on the minimum building regulations for bathrooms. Choose more for large rooms or long duct runs. Bends can slow airflow, so it is beneficial to have a margin.


To convert, divide m³/h by 3.6. Example: A windowless bathroom with a 3-metre duct and two bends needs a fan that comfortably exceeds 15 l/s.


3. Assess the Noise Level


Noise is shown in dB(A), and lower means quieter. Many quiet fans sit around 25 to 35 dB(A), close to a whisper. Compare fans tested at the same distance. Inline fans are often quieter in the room because the motor sits in the duct.


4. Match the IP Rating to Your Bathroom Zones


BS 7671 splits a bathroom into zones. Fans in zones 1 and 2 need at least IPX4. Outside the zones, no minimum is set. Check which zone your fan will sit in before you buy.


Zone

Where it is

Minimum IP rating

Zone 1

Above the bath or shower, up to 2.25m

IPX4

Zone 2

Up to 0.6m around Zone 1, plus above 2.25m

IPX4

Outside zones

The rest of the room

No set minimum


Bathroom circuits also need RCD protection. Our guide on RCD vs RCBO explains the options.


5. Pick the Right Controls


Match the controls to how you use the room. A timer or light-switch link keeps the fan running after you leave. If your bathroom has no window, Building Regulations suggest a 15-minute overrun. A humidity sensor starts the fan for you.


  • Timer: keeps running after you switch off

  • Light-switch link: starts with the light

  • Humidity sensor: starts when the air gets damp

  • Backdraft shutter: stops cold air from coming back in


6. Check the Fit


Match the fan to your duct and opening. Most bathrooms use 100mm or 150mm ducting, so check the duct size on the product page. A fan that is too large or too small will not fit. A snug fit also keeps air moving well.


At Ghir Electrical Supplies Ltd, our bathroom extractor fans include 100mm and 150mm inline and axial timer models.


Choose the Right Fan With Confidence


You now know what to check: type, airflow, noise, IP rating, controls and fit. For wider damp control, explore our Ventilation & Hygiene range, which also includes dehumidifiers.


FAQs for Bathroom Extractor Fan


What size extractor fan do I need for a bathroom?


At least 15 litres per second. Most bathrooms use a 100mm fan. Choose more airflow for large rooms or long duct runs.


Does a bathroom extractor fan need a timer?


Not always, but it helps. Building Regulations suggest a 15-minute overrun for windowless bathrooms, so steam clears after you leave.


How loud should a bathroom extractor fan be?


Aim for 25 to 35 dB(A). Lower numbers sound quieter.


What IP rating does a bathroom fan require?


Zones 1 and 2 need at least IPX4. Outside the zones, no minimum is set.


Which is better: axial or inline?


Axial suits short runs. Inline sits in the duct, so it is often quieter and suits longer runs.


Is a humidity sensor fan worth it?


Yes, if you often forget to switch the fan on. It starts when the air gets damp.




 
 
 

Comments


bottom of page